ER-TF, Wide-area Ionizer – Panasonic

$ 1,041.90 – $ 1,237.40

SKU N/A Category Panasonic Ionizers Static Control Devices

Model

Clear

Specifications

Type			Wide-area fan type
Model No.			ER-TF04-EX	ER-TF06-EX	ER-TF08-EX
CE marking directive compliance			EMC Directive, RoHS Directive
Charge removal time (±1,000 V → ±100 V)			1 sec. approx. (Note 2)
Ion balance			±10 V or less (Note 3)
Ozone generation			0.02 ppm or less (Note 3)
Power supply voltage			Accessory AC adapter input: 100-240 V AC ± 10 % 50/60 Hz(Note 4) (Output: 24 V DC)
Power consumption			80 VA or less (at 100 V: 70 VA or less)
Discharge method			Steady-state DC
Discharge output voltage			±6,000 V approx.
Error output			NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1 V or less (at 50 mA sink current)
Error output：Output operation			OFF if abnormal discharge, object inserted into discharge window or fan problem detected; normally ON
Error output：Short-circuit protection			Incorporated
Indicators	Bar	POWER	Green LED (Lights up when the power is ON)
		ERROR	Red LED (Lights up when discharge part error or fan error is detected)
		CHECK	Orange LED (Lights up when discharge part check or fan check is detected)
	Fan	Discharge part status	Yellow LED (Lights up when discharge part error or discharge part check is detected)
		Fan status	RYellow LED (Lights up when fan error or fan check is detected)
Ambient temperature			0 to + 50 ℃ + 32 to + 122 ℉ (No dew condensation), AC adapter: 0 to + 40 ℃ + 32 to + 104 ℉
Ambient humidity			35 to 65 % RH (No dew condensation allowed)
Material			Bar unit enclosure: ABS, Fan unit enclosure: ABS, Discharge needles: Tungsten, Mounting bracket: Cold rolled carbon steel (SPCC)
Net weight			1.0 kg approx.	1.2 kg approx.	1.4 kg approx.
Accessories			AC adapter (Note 3), F.G. connection cable: 1 pc., Spare replacement filters: 5 pcs., Three-pronged outlet with ground pin: 1 pc., Blindfold seals: 2 sheets

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) Typical value at 200 mm 7.874 in from directly in front of air outlet at the unit center at maximum fan speed.
3) Typical value at 300 mm 11.811 in from directly in front of air outlet at the unit center at maximum fan speed.
4)Please prepare an AC cable separately as it is needed. The following cables are available as optionals: CN-ACCN-C2: AC cable (conforming to CCC), CN-ACKR-C2: AC cable (conforming to KTL)