Autonics Sensors
Features
- Sensing type : Convergent reflective type
- Sensing distance : 5 to 15mm
- Sensing target : Opaque, Translucent material(min. sensing target: Ø0.15mm)
- Light source : Red LED(650nm)
- Response time : Max. 1ms
- Power supply : 12-24VDC
±10%(ripple P-P: max. 10%) - Operation mode : Light ON
- Control output : PNP open collecto
Specifications
Data sheet
| Sensing type | Convergent reflective type |
|---|---|
| Sensing distance | 5 to 15mm |
| Sensing target | Opaque, Translucent material(min. sensing target: Ø0.15mm) |
| Light source | Red LED(650nm) |
| Response time | Max. 1ms |
| Power supply | 12-24VDC ±10%(ripple P-P: max. 10%) |
| Current consumption | Max. 20mA |
| Operation mode | Light ON |
| Control output | PNP open collector |
| Connection type | Cable type(Ø2.5, 2m) |
| Environment_Ambient illumination | Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) |
| Environment_Ambient temperature | -20 to 55℃, storage: -30 to 70℃ |
| Protection structure | IP67 |
| Approval |  |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Hysteresis(distance) | Max. 15% of maximum sensing distance |
| Material | Case: Polybutylene terephthalate, Sensing part: Polymethyl methacrylate, Bracket: Stainless steel 304, Bolt: Carbon steel wire for cold heading(SWCH10A) |
| Weight | Approx. 45g(approx. 25g) |
![PANASONIC_Safety Liquid Leak Sensor [Control Category 4 PLe SIL3]-SQ4-A21-N](https://inosaki.in/wp-content/uploads/2023/06/PANASONIC_Safety-Liquid-Leak-Sensor-Control-Category-4-PLe-SIL3-SQ4-A21-N.webp)
